hplogo
HP 5500 EI Switch

Layer 2/3 Gigabit Ethernet switch, 1U

!

HP 5500-24G EI Switch with 2 Interface Slots JD377A

!
jd377a

Performance

  • 1000 Mb Latency:< 3.2 µs
  • 10 Gbps Latency:< 2.6 µs
  • Throughput:107.2 million pps
  • Routing/Switching capacity:144 Gb/s
  • Routing table size:12000 entries (IPv4)

24 RJ-45  10/100/1000 port

4 dual-personality port; 10/100/1000Base-T veya SFP

min=0 \ max=4 SFP Transceiver

2 port expansion module slot

HP 5500-48G EI Switch with 2 Interface Slots JD375A

!
jd375a

Performance

  • 1000 Mb Latency: < 3.2 µs
  • 10 Gbps Latency: < 2.6 µs
  • Throughput: 142.9 million pps
  • Routing/Switching capacity: 192 Gb/s
  • Routing table size: 12000 entries (IPv4)

48 RJ-45 10/100/1000 port

4 dual-personality port; 10/100/1000Base-T veya SFP

min=0 \ max=4 SFP Transceiver

2 port expansion module slot

Power Supply

HP 5500-24G-SFP EI Switch with 2 Interface Slots JD374A

!
jd374a

Performance

  • 1000 Mb Latency : < 3.2 µs
  • 10 Gbps Latency: < 2.6 µs
  • Throughput : 107.2 million pps
  • Routing/Switching capacity : 144 Gb/s
  • Routing table size : 12000 entries (IPv4)

24 fixed Gigabit Ethernet SFP port

8 dual-personality port; 10/100/1000BASE-T veya SFP min=0 \ max=32 SFP Transceiver

2 port expansion module slot

1 x HP 5500 150WAC Power Supply (JD362A) (Max.2 )

HP 5500-48G-PoE+ EI Switch with 2 Interface Slots JG240A

!
jg240a

HP 5500-48G-PoE+ EI Switch with 2 Interface Slots (JG240A)

Ports:

  • 48 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex:10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
  • 4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
  • 2 port expansion module slots
  • 1 RJ-45 serial console port
  • Supports a maximum of 48 autosensing 10/100/1000 ports

(1U height)

Memory and processor:256 MB SDRAM, 32 MB flash; packet buffer size: 4 MB

Performance:

  • 1000 Mb Latency: < 3.2 µs
  • 10 Gbps Latency: < 2.6 µs
  • Throughput: 142.9 million pps
  • Routing/Switching capacity: 192 Gb/s
  • Routing table size: 12000 entries (IPv4)

Voltage: 100-240 VAC

DC voltage: -52 to -55 VDC

Maximum power rating: 910 W

PoE power: 740 W

Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).

With AC input, the maximum power consumption is 640 W; PoE is 370 W.

Management:IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB

HP 5500-24G-PoE+ EI Switch with 2 Interface Slots JG241A

!
jg241a

HP 5500-24G-PoE+ EI Switch with 2 Interface Slots (JG241A)

Ports:

  • 24 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex:
  • 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
  • 4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
  • 2 port expansion module slots
  • 1 RJ-45 serial console port
  • Supports a maximum of 24 autosensing 10/100/1000 ports

(1U height)

Memory and processor: 256 MB SDRAM, 32 MB flash; packet buffer size: 2 MB

Performance

  • 1000 Mb Latency: < 3.2 µs
  • 10 Gbps Latency: < 2.6 µs
  • Throughput: 107.2 million pps
  • Routing/Switching capacity:144 Gb/s
  • Routing table size: 12000 entries (IPv4)

Voltage: 100-240 VAC

DC Voltage: 52 to -55 VDC

Maximum power rating: 575 W

PoE power: 370 W

Notes:

Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the power supplied by the internal power supply. It is dependent on the type and quantity of power supplies and may be supplemented with the use of an external power supply (EPS).

With DC input, the maximum power consumption is 485 W; PoE is 370 W.

Management:IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager; IEEE 802.3 Ethernet MIB